REMOVING FRONT GLASS
Models WM-FM-26-3623-BG , WM-FM-36-4423-BG , WM-FM-48-5823-BG and WM-FM-60
-7023-BG each have 2 screws that secure the front glass in place.
Models WM-FM-72-
8123-BG and WM-FM-88-10023-BG have four screws secure the front glass in place.
Two people are required for the installation process.
1. The back-lighting LED is located on the back of the glass. Before removing the glass
you must unplug the back-lighting from the unit. This plug is located at the bottom left
hand side behind the front of the glass.
2. The screws are located on the sides of the unit. Once located, unscrew the two or four screws.
You can then lift the front glass from the 4 shoulder posts on the sides of the unit and remove
the glass.
3. To replace the glass, lift onto the 4 shoulder posts. For a Wall Mount installation,replace the
two or four screws to secure the glass. For Flush Mount installs it is not possible to replace
the screws.
Location of the back-lighting plug
Unplug the back-lighting
Screw locations on uint
Lift glass from shoulder posts
12
Summary of Contents for WM-FM-26-3623-BG
Page 26: ...EXPLODED VIEW 26...
