RW-600 Record Cleaner
Introduction
1: When the yellow LED is lit, the cleaning operation is in progress.
2: When the green LED is lit, the device is ready, or the cleaning is completed.
3: When the red LED is lit, the yellow LED and green LED will not light. The cleaning
process does not start. The cleaning fluid level is too low because the level switch is
in the low position. The cleaner needs to be filled with cleaning fluid until the red
LED indicator is off and the green LED is lit.
4: The red start button activates the cleaning process and the yellow LED lights up,
providing that the green LED lights up and show the cleaner is ready to clean
5: Main power switch.
