RW-600 Record Cleaner
Operations
During normal operation, as long as you turn on the machine and its ready to clean
(green LED lights), simply insert the vinyl record, press the red start button and
everything is done automatically.
The yellow LED lights up during cleaning operation, when the green LED light is on,
the buzzer sounds and a cleaning cycle is completed, then take out the and proceed
to the next cleaning cycle.
Maintenance
After cleaning about 100 records, the filter sponge needs to be cleaned and the
cleaning fluid needs to be replaced.
Open the wastewater discharge valve
(11)
to release the waste water! Remove the
filter sponge
(12)
. Clean the sponge using distilled water, and then clean the
equipment tank twice with distilled water or purified water. Then close the waste
water discharge valve and carry out the preparation work procedure listed above in
this document.