RW-600 Record Cleaner
After cleaning about 500 records, it is necessary to replace four microfiber-cleaning
rollers. Simply pull up on the cleaning roller, replace it with new ones. Align the drive
pin with the holes of the rollers, push the new rollers down gently and then turn it
slightly until the roller sit properly.
Caution!
This record cleaner can only be used to clean records with a diameter of 12 inches.
Only the original Amari Cleaning Fluid. When other cleaning agents are used, the
equipment and the record could be damaged. Any corrosive or acidic detergent or
alcohol will damage the equipment. If a third-party cleaner is used, the warranty will
be void!
For cleaning the surface of the record cleaner, just use a soft damp cloth and neutral
detergent.