Anhui Huami Healthcare Co.,Ltd.
Environment specifications
Operational temperature: +10
℃
~+40
℃
Operational humidity: 30%~75% (non-condensing)
Storage temperature: -10
℃
~+45
℃
Storage humidity: 10%~95% (non-condensing)
16. ELECTROMAGNETIC & OTHER INTERFERENCES
The Amazfit Health Watch has been tested and deemed in conformance with the relevant
requirements in IEC60601-1-2:2014 Class BF for Electromagnetic Compatibility (EMC).
The Midong Health Watch has been tested with relevant requirement standard
IEC60601-1-11:2015.
17.
Electrical safety
17.1 Electromagnetic Emissions
The system is intended for use in the electromagnetic environment specified in Table 1.
The customer or the user of the system should ensure that it is used in such an
environment.
WARNING
-
The use of this equipment adjacent to or stacked with other equipment should be
avoided because it could result in improper operation. If such use is necessary, this
equipment and the other equipment should be observed to verify that they are operating
normally.
-
In addition to the accessories provided by the equipment manufacturer, the use of
other accessories may cause increased electromagnetic radiation or reduce
electromagnetic immunity, resulting in equipment failure.
-
Stay away from active high-frequency surgical equipment in hospitals and RF
shielded rooms for systems used for magnetic resonance imaging, where electromagnetic
interference is high.
Table 1 Electromagnetic Emissions: Environment Guidance
Emissions Test
Compliance
Electromagnetic
Environment
Guidance
RF emissions
CISPR 11
Group 1
The system uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
17.2 Electromagnetic Immunity
The system is intended for use in the electromagnetic environment specified in Table 2.
