11
ENGLISH
English
Français
Deutsch
Italiano
Español
Nederlands
2)
With stubborn situations where the reverse function does not help, you may loosen the
jammed paper with shredder oil (cooking oil is acceptable, nothing aerosol). Start by drizzling
oil into the feed slot where the paper is jammed. Let it soak for about 30 minutes to com-
pletely saturate. Return the shredder back to
Auto-On mode. If required, an index
card or a rigid sheet of cardstock (old greeting card or folded file folder)
can be fed into the shredder to help push the jammed paper through.
The shredder is constantly running while in “Auto (On)” mode.
1)
It is possible that the activation sensor, which starts the shredder, has become blocked with
paper. Insert an index card or any rigid sheet of cardstock (old greeting card or folded file
folder), directly in the center of the feed slot, while applying force to help push the jammed
paper through. This will usually clear any paper blocking the activation sensor and feed slot.
2)
The activation sensor is being triggered by dust, debris, or oil. A cotton swab may be used to
clean the sensor. DO NOT USE CANNED AIR. The activation sensor of the shredder is
located around the center of the feed slot.
Power switch in auto position
Use thick paper stock or greeting card
to push the jam through
Troubleshooting
Summary of Contents for AU864XA
Page 2: ......
