9
EN
• Carefully slide the cutter (H/I) in the inner edge of the cutting disk (J).
• Press the cutter (H/I) down until it locks in place.
• Place the shaft (L) In the middle of the bowl (C).
• Place the cutting disk (J) on the shaft (L).
NOTICE
To remove the cutter (H/I) from the cutting disk (J) carefully
push it out from the bottom.
Lid
• Place the lid (B) on the bowl (C).
• Turn the lid (B) in a clockwise direction until it locks in place.
•
Option A:
Close the feeding chute with the pusher (A).
•
Option B:
Put the food into the feeding chute. Use the pusher to
move it to the cutting disk (J).
Operation
Place the motor unit (A) on a stable and level surface.
Switching on/off
NOTICE
The product cannot be switched on if the bowl (C) and the
lid (B) are not placed and locked properly.
• Connect the plug (F) to a suitable socket outlet.
• To switch the product on, press the
ON
(M) button.
• To switch the product off, press the
OFF/PULSE
(N) button.
• To use the pulse function, press and hold the
OFF/PULSE
(N) button.
Release to switch off.
