Assembly
Instructions
for your
Kindle Heater
Reflector
Shade Bracket
Post
Weighted Base
Do not attach the
1/2” pipe nipple.
1. Assemble your heater according to the
instructions provided by the heater’s
manufacturing company. (Refer to the
included Sunglo A242 manual in the heater
box). Do not tighten the bolt at the base of
the post in step 1, or attach the 1/2” pipe
nipple in step 4.
2. Remove the 3
wing nuts
and top
washers
that
secure the
reflector
to the top of the heater.
Place the
shade bracket
on top of the
reflector
with the
stand-offs
pointing downward. Replace
washers and wing nuts and securely tighten.
Shade Bracket
Wing Nut
Washer
Reflector
Do not attach this bolt.