4
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use. If this
product is passed to a third party, then these instructions must be
included.
When using the product, basic safety precautions should always be followed to
reduce the risk of injury including the following:
• This product will need tension adjustments after installation is complete. Make
sure that all equipment is properly installed on the product before attempting
range of motion or tension adjustments. Any time equipment is added or changed
on this product resulting in a different mounted weight, you should repeat the
adjustment steps to ensure safe and optimum operation. This product should
move smoothly and easily through the full range of motion and stay where you set
it. If movement is difficult or the product does not stay where you set it, follow the
adjustment instructions to loosen or tighten the tension to create a smooth, easy
motion. Depending on your product and the adjustment, it may take many turns
to notice a difference.
Before First Use
• Check for transport damages.
DANGER
Risk of suffocation!
Keep any packaging materials away from
children – these materials are a potential source of danger, e.g.
suffocation.
Assembly
Step 1: Lock the arm orientation
E
• On your existing mount arm, insert the M3 × 6 mm screw into the front of the
plate to lock its orientation.
