4
Before First Use
• Check for transport damage.
Risk of suffocation!
Keep any packaging materials away from children – these
materials are a potential source of danger, e.g. suffocation.
Installation
Step 1: Latch Backset Adjustment
4
1. The backset is the distance from the door edge to the center of the hole on the door
face. Some locks are supplied with an adjustable latch which can fit a 2-3/8" (60 mm) or
2-3/4" (70 mm) backset. Just follow the steps shown blow to change the backset.
2. This latch is set for a 2-3/8" (60 mm) backset.
3. Keep the spindle cam in correct position as illustrated. Pull the spindle cam all the way to the
right.
4. Your latch is now set for a 2-3/4" (70 mm) backset. To reset a 2-3/8" (60 mm) backset, just
push the spindle cam back to the left side. Please make sure that the cams stay with a squared
shape.
DANGER
