Pausing boundary recording with master
Manual boundary line recording can be interrupted
during application by switching off all of the part-width
sections. This has the advantage that the boundary line
recording does not have to be interrupted separately
when manoeuvring on the field.
1. In the setup menu, tap on
"User"
>
"Map"
.
2. Select
" Pause boundary recording with master "
.
Possible settings:
Enabled: The boundary line recording is interrupted
when all of the part-width sections are switched off on
the Universal Terminal.
Disabled: The boundary line recording can only be
interrupted using the
button the in field menu.
Defining the visual reference line length
A line can be shown on the map in front of the vehicle
symbol, which assists the driver with manual track
guidance.
1. In the setup menu, tap on
"User"
>
"Map"
.
2. Tap on
" Visual reference line length "
.
Possible settings:
Value between 0 m and 20 m
005352
005349
F | Configuring the AMAPAD | Entering the user settings
MG5574-
EN
-II | B.1 | 25.10.2016
40
