Possible settings:
1
Set start point: Defines the starting point of the A-B
line using the current vehicle position.
2
Latitude of the starting point for the A-B line.
3
Longitude of the starting point for the A-B line.
4
Set end point: Defines the end point of the A-B line
using the current vehicle position.
5
Latitude of the end point for the A-B line.
6
Longitude of the end point for the A-B line.
7
Direction of the track line: Instead of the
coordinates of the end point for the A-B line, the
direction of the track line from the starting point can
be entered in degrees.
8
Delete entries.
7. Enter coordinates.
8. Confirm with
.
1.3 Creating curved track lines
Curved track lines are suitable for fields that are not
rectangular. Curved track lines can be recorded e.g.
along an irregular field edge. The field edge then serves
as a template for the curved track line.
002054
K | Using track lines | Creating track lines
MG5574-
EN
-II | B.1 | 25.10.2016
150
