A scale is shown for the precision of the recorded
circular track line.
7. Drive in circles around the centre of the field.
When the AMAPAD has detected the radius of the
circle, the circular track lines will be created.
NOTE
Only the middle circular track line and the circular
track lines right and left of the vehicle are shown. The
next circular track lines will only be shown when the
vehicle changes to the next row.
1.5 Creating adaptive track lines
The adaptive curved track line follows the edge of the
previously worked area. This takes account of
unexpected deviations while working, e.g. due to
obstacles.
REQUIREMENTS
Field is created; see page 127
Track line pattern for adaptive track lines is
selected; see page 147
1. In the job menu, tap on
.
2. Start the job.
3. Work the row.
The adaptive curved track line will be recorded.
002079
K | Using track lines | Creating track lines
MG5574-
EN
-II | B.1 | 25.10.2016
153
