The exact following harrow does not cover the seed sufficiently with fine soil
The following actions must be performed to replace
worn shear bolts
1
.
1.
To position the exact following harrow
correctly,
Lift the implement.
2.
Remove the remainders of the torn shear bolt
1
.
3.
Take out one of the spare shear bolts
2
.
4.
Install the spare shear bolt with washers and nut
at position
1
.
1
2
CMS-I-00004678
The following actions must be performed when the
harrow tines are worn.
1.
Remove the nuts
1
.
2.
Remove the bolts
5
and plates
2
.
3.
Replace the harrow tines
3
and
4
.
4.
Install the plates and bolts.
5.
Install the nuts and tighten them.
3
2
1
4
2
5
CMS-I-00004677
The fan speed displayed on the control terminal or control computer is too high
To adjust the fan speed,
see "Setting the fan speed hydraulically"
or
see "Setting the fan speed manually".
CMS-T-00007581-A.1
CMS-T-00007763-B.1
8 | Eliminating faults
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
102
