9.
Push the sliding shutter
2
into the metering unit
housing.
10. Park the socket wrench in the holder
1
.
11.
To empty the metering unit and the metering
roller,
refer to the ISOBUS software operating manual,
"Emptying"
or
see "control computer" operating manual.
2
1
CMS-I-00005259
12.
Before work is started again,
park the sliding shutter
2
on the metering unit
housing.
13. Swivel the bolts
3
in front of the sliding shutter.
14. Tighten the bolts with the socket wrench
1
.
1
3
2
CMS-I-00005255
15. Close the calibration flap
1
.
1
CMS-I-00006791
9 | Parking the implement
Emptying the metering unit
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
110
