6.3.2 Coupling the power supply
1.
Insert the plug
1
for the power supply.
2.
Route the power supply cable with sufficient
freedom of movement and without chafing or
pinching points.
3.
Check the lighting on the implement for proper
function.
1
CMS-I-00001048
6.3.3 Coupling the hydraulic hose lines
All hydraulic hoses are equipped with handles. The
handles have colour markings with a code number
or a code letter. The markings are assigned to the
respective hydraulic functions of the pressure line
of a tractor control unit. Stickers are applied on
the implement for the markings, which illustrate the
respective hydraulic functions.
The tractor control unit is used with different types of
actuation, depending on the hydraulic function:
CMS-I-00000121
Type of actuation
Function
Symbol
Latching
Permanent oil circulation
Momentary
Oil circulation until action is
executed
Floating
Free oil flow in the tractor control
unit
CMS-T-00001399-F.1
CMS-T-00009866-A.1
6 | Preparing the implement
Coupling the implement
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
50
