15. Connect the supply line
1
for monitoring the soil
tillage implement
2
.
CMS-I-00004528
6.4 Preparing the implement for operation
6.4.1 Opening and closing the roller tarpaulin
1.
Hold onto the belt
3
.
2.
Release the straps
2
from the studs.
3.
To open the roller tarpaulin
1
,
let go of the belt.
4.
To close the roller tarpaulin,
pull on the belt until the roller tarpaulin completely
covers the hopper opening.
5.
Fasten the straps on the studs.
2
3
1
CMS-I-00006780
6.4.2 Adjusting the working position sensor
The working position sensor monitors the implement
position in the three-point hydraulic system and
switches the metering drives. The lever length is
adjustable.
1.
loosen the nut
1
.
2.
Place the lever
2
on an level contact surface on
the top link
3
.
3.
Tighten the nut.
4.
To ensure that the working position sensor is
resting on a level surface,
completely lift and lower the implement.
1
2
3
CMS-I-00002608
CMS-T-00009808-A.1
CMS-T-00009945-A.1
CMS-T-00003625-E.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
55
