3.
To reduce the coulter pressure,
turn the universal operating tool counter-
clockwise
or
To increase the coulter pressure,
turn the universal operating tool clockwise.
4.
The scale
3
serves as orientation.
5.
Take off the universal operating tool and allow the
catch
2
to engage in a groove of the grid.
6.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
6.4.5.2 Adjusting the coulter pressure hydraulically
NOTE
The adjustment of the coulter pressure must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
WARNING
Unexpected movement of the coulter and
exact following harrow
The hydraulic cylinders for the coulter
pressure adjustment and the exact following
harrow pressure adjustment are actuated
simultaneously.
Before you actuate the tractor control
unit,
direct people out of the danger area.
1.
Activate the function on implements with
Comfort hydraulic system,
see ISOBUS software operating manual "Pre-
selection for hydraulic functions".
2.
Adjust the values for the coulter pressure on
implements without Comfort hydraulic system,
see ISOBUS software operating manual "Coulter
pressure settings".
CMS-T-00004361-C.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
59
