WARNING
Unexpected movement of the coulter and
exact following harrow
The hydraulic cylinders for the coulter
pressure adjustment and the exact following
harrow pressure adjustment are actuated
simultaneously.
Before you actuate the tractor control
unit,
direct people out of the danger area.
1.
To define the maximum coulter pressure,
insert the pin
2
in the desired position.
2.
To define the minimum coulter pressure,
insert the pin
1
in the desired position.
3.
To increase the coulter pressure,
actuate the "green 1" tractor control unit
or
To reduce the coulter pressure,
put the "green" tractor control unit into float
position.
CMS-I-00005586
The mechanical coulter pressure display on the
implement shows the set coulter pressure.
4.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
1
2
CMS-I-00006168
6.4.7 Adjusting the seed rate increase
The seed rate can be increased if necessary. This
can be the case e.g. when changing to heavy soils.
CMS-T-00010570-A.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
61
