REQUIREMENTS
Adjusting the coulter pressure
The seed placement depth is adjusted with two
adjustment spindles. The adjustment spindles are
located on the right and left side of the implement
respectively.
1.
Put the universal operating tool
1
on the
adjustment shaft
2
.
1
2
CMS-I-00006883
The scale
1
serves as orientation.
1
CMS-I-00006884
2.
To reduce the coulter pressure,
turn the universal operating tool counter-
clockwise
-
or
To increase the coulter pressure,
turn the universal operating tool clockwise
+
.
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
63
