NOTE
The adjustment of the harrow angle must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
1.
Lift the implement.
2.
To move the harrow tine
1
to the steep
working position,
Install the pin
2
in the hole shown.
The harrow tine is resting on the pin.
3.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
2
1
CMS-I-00003185
6.4.10.2 Deactivating the harrow tines
1.
Lift the implement.
2.
Remove the pins
1
and
2
.
2
1
CMS-I-00003188
3.
fold up the harrow
1
.
4.
Install the pins
2
and
3
in the indicated hole.
1
2
3
CMS-I-00003183
CMS-T-00004370-C.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
68
