6.4.10.3 Adjusting the harrow height
NOTE
The adjustment of the harrow height must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
1.
Remove the nut
1
.
2.
Remove the bolt
3
.
3.
Move the harrow bracket
2
to the desired
position.
4.
Install the bolt
3
.
5.
Install the nut
1
and tighten it.
6.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
1
2
3
+
-
CMS-I-00003182
6.4.11 Adjusting the exact following harrow
6.4.11.1 Adjusting the position of the exact following harrow tines
When the exact following harrow is properly adjusted,
the harrow tines rest horizontally on the ground and
have 50-80 mm downward play.
To make adjustments, the distance
A
between the
carrier tube and the ground is adjusted. The distance
must be 230-280 mm.
Depending on the equipment, the exact following
harrows can be adjusted with removable bolts or
using the universal operating tool. Both versions are
listed here.
A
CMS-I-00004668
CMS-T-00006457-A.1
CMS-T-00008776-A.1
CMS-T-00008780-A.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
69
