Parking the implement
9
9.1 Emptying the hopper
9.1.1 Emptying the hopper via the quick emptying
1.
Switch off the fan.
2.
To start the quick emptying,
actuate the lever
2
.
The flap will be opened
1
.
3.
Collect the residual quantity in a collection bucket.
4.
When the seed hopper is emptied,
Close the quick emptying.
2
1
CMS-I-00006781
9.1.2 Emptying the hopper via the metering unit
1.
To unlock the calibration bucket,
remove the linch pin
1
from the holder.
1
CMS-I-00006873
CMS-T-00009812-A.1
CMS-T-00009845-A.1
CMS-T-00009846-A.1
CMS-T-00009847-A.1
9 | Parking the implement
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
103
