5.
Depending on the implement equipment,
fill the hopper through the hopper sieve
1
or
fill the hopper directly.
6.
Close the roller tarpaulin.
1
CMS-I-00006777
7.
Swivel up the loading board
1
.
8.
Secure the loading board with the locking
mechanism
2
.
1
2
CMS-I-00005281
6.4.5 Adjusting the coulter pressure on the TwinTeC Special coulter
6.4.5.1 Adjusting the coulter pressure mechanically
NOTE
The adjustment of the coulter pressure must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
1.
Lift the implement.
The coulter pressure is adjusted with two adjustment
spindles. The adjustment spindles are located on the
right and left side of the implement respectively.
2.
Put the universal operating tool on the adjustment
spindle
1
.
1
2
3
CMS-I-00007037
CMS-T-00010310-A.1
CMS-T-00010311-A.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
58
