Using the implement
7
7.1 Removing the road safety bars
1.
Remove the road safety bars from the rear
harrow.
2.
Turn the traffic safety bars
1
by 180°, place on
top of each other on the brackets
2
.
3.
Secure the road safety bars with tensioners
3
.
CMS-I-00000518
7.2 Moving the exact following harrow into working position
The roller and the coulters force the soil outwards to
different extents depending on the forward speed and
the soil properties. The outer harrow elements must
be adjusted such that the soil is guided back and a
trackless seedbed is created. The greater the forward
speed, the further the outer harrow elements have to
be set outwards.
CMS-T-00009810-A.1
CMS-T-00000091-C.1
CMS-T-00006334-A.1
7 | Using the implement
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
93
