Operation
106
Citan BAG0014.4 09.14
10.1.2
Folding in machine
Warning!
Prior to folding the machine:
•
Fold the pre-emergence marker into transport position.
•
Fold the track markers into transport position.
Machine with AMATRON 3
1. Press shift key
.
→
Symbol appears in the operating menu.
2. Actuate control valve
yellow
.
→
Fold the rear frame until an inclination of
approx. 80° (Fig. 111).
3. Actuate control valve
green
→
Fold the wings (Fig. 112/1) until the slide
skids of the transport locking.
Fig. 110
Fig. 111
Fig. 112
Warning!
During the folding procedure ob-
serve the possible collision of the
wings with the machine.
If necessary re-adjust the inclination
of the rear frame!
4. Actuate control valve
yellow
→
The machine wings (Fig. 112/1) lower into
the transport locking
(
Fig. 112/2).
Machine with AMALOG
+
1. Setting the hydraulic hand lever (Fig. 110)
1.1 Lever
1
in position
A
1.2 Lever
2
in position
B
2. Actuate control valve
yellow
→
Fold the rear frame until an inclination of
approx. 80° (Fig. 111).
3. Actuate control valve
green.
→
Fold the wings until the slide skids of the
transport locking.
Warning!
During the folding procedure ob-
serve the possible collision of the
wings with the machine.
If necessary re-adjust the inclina-
tion of the rear frame!
