Cleaning, maintenance and repairs
62
GreenDrill BAH0054-4 02.13
8
Cleaning, maintenance and repairs
WARNING
Risk of crushing, shearing, cutting, being caught and/or drawn
in, or impact through
Unintentional lowering of the machine raised using the
tractor's three-point hydraulic system.
Unintentional lowering of raised, unsecured machine parts.
Unintentional start-up and rolling away of the tractor-
machine combination.
Secure the tractor and the machine against unintentional start-up and
rolling before eliminating any faults on the machine.
Wait for the machine to stop before entering the danger area of the
machine.
WARNING
Risk of crushing, shearing, cutting, being caught and/or drawn
in, or impact through unprotected danger points
Mount protective equipment, which you removed when cleaning,
maintaining and repairing the machine.
Replace defective protective equipment with new equipment.
Never crawl under a raised, unsecured machine.
Before charging the tractor battery with a charger, remove the cable
from the on-board computer. Otherwise, voltage peaks may damage
the on-board computer.
8.1
Initial operation
Tighten all bolted connections after approx. 20 operating hours, then check these connections every
250 operating hours.
Summary of Contents for GreenDrill 200-E
Page 2: ...2 GreenDrill BAH0054 4 02 13...
Page 69: ......
