IMPORTANT
Implement damage due to insufficient
hydraulic oil return flow
Only use DN16 lines for the pressureless
hydraulic oil return flow.
Select short return paths.
Connect the pressureless hydraulic return
flow correctly.
Install the supplied coupling sleeve on the
pressureless hydraulic oil return.
1.
Depressurise the hydraulic system between the
tractor and the implement using the tractor control
unit.
2.
Clean the hydraulic plugs.
3.
Couple the hydraulic hose lines
1
to the
hydraulic sockets of the tractor according to the
marking
2
.
The hydraulic plugs lock perceptibly.
4.
Route the hydraulic hose lines with sufficient
freedom of movement and without chafing points.
1
2
CMS-I-00001045
6.6.3 Coupling the power supply
1.
Insert the plug
1
for the power supply.
2.
Route the power supply cable with sufficient
freedom of movement and without chafing or
pinching points.
3.
Check the lighting on the implement for proper
function.
1
CMS-I-00001048
CMS-T-00001399-C.1
6 | Preparing the machine
Coupling the implement
MG6750-EN-II | C.1 | 21.07.2021
55
Summary of Contents for KG 6002-2
Page 1: ...Original operating manual Rotary cultivator KG 6002 2 SmartLearning www amazone de...
Page 6: ......
Page 117: ......
