3. Take the mulch flap out of the cutting deck.
4. Clean the mulch flap.
5. Close the rotor protective cover.
6. Put the mulch flap
1
on the rotor protective
cover.
The mulch flap must grip on the left and right
under the hooks
2
.
7. Tighten the locking screw
3
.
The mulch flap is locked in transport position.
8. Check that the mulch flap is securely fastened.
CMS-I-00002378
6.18
Adjusting the cutting height
1. Pull the locking mechanism
1
on the bracket
towards the front.
2. Take out the crank
2
.
CMS-I-00002314
3. Push the crank
1
onto the setting screw.
4.
To adjust the cutting height,
Turn the crank to the left or right.
The set cutting height is shown on the cutting
height indicator
2
.
CMS-I-00002316
CMS-T-00002538-B.1
6 | Preparing the machine
Adjusting the cutting height
MG6399-EN-II | D.1 | 11.03.2020
85
Summary of Contents for Profihopper 1500 SmartLine
Page 153: ......
