User Information
8
ZG-
B
BAG0170.2 02.21
1
User Information
The User Information section provides information on use of the oper-
ating manual.
1.1
Purpose of the document
This operating manual
•
Describes the operation and maintenance of the machine.
•
Provides important information on safe and efficient handling of
the machine.
•
Is a component part of the machine and should always be kept
with the machine or the traction vehicle.
•
Keep it in a safe place for future use.
1.2
Locations in the operating manual
All the directions specified in the operating manual are always seen
from the direction of travel.
1.3
Diagrams used
Operator control action and responses
Actions to be carried out by the operator are given as a numbered list.
It is important that the sequence of steps is observed. The responses
for each operator control action are given by an arrow. Example:
1. Operator control action step 1
→
Machine response to operator control action 1
2. Operator control action step 2
Lists
Lists without an essential order are shown as a list with bullets. Ex-
ample:
•
Point 1
•
Point 2
Number items in diagrams
Numbers in round bracket refer to items in diagrams. The first number
refers to the diagram and the second number to the item in the figure.
Example: (Fig. 3/6)
•
Figure 3
•
Item 6
Summary of Contents for ZG-B 8200 Truck
Page 97: ...Hydraulic diagram ZG B BAG0170 2 02 21 97 ...
Page 98: ......
