Coupling and uncoupling the implement
116
Centaya Super BAH0092-6 10.20
7.2.1
Coupling - Tractor and soil tillage implement
Couple the soil tillage implement and the tractor,
refer to the "Soil tillage implement" operating
manual.
A working position sensor transmits the pulses to
switch the electric motor for the metering roller
drive on and off.
Fig. 125
Calibrate the working position sensor each time
the tractor and implement combination is
coupled, see section Fig. 226, page 176.
Seed drills with and without ISOBUS system
have an analogue working position sensor (Fig.
126/1).
The bracket with the analogue working position
sensor (Fig. 126/1) is fastened on the top link of
the soil tillage implement.
The working position sensor determines the
implement position depending on the position of
the top link by means of a spring-loaded arm (Fig.
126/3).
The equipment of your seed drill with seed tube
monitoring requires a second working position
sensor. This adjustable digital working position
sensor with a magnet (Fig. 126/2) supplies the
pulse for switching the seed tube monitoring on
and off.
Fig. 126
Summary of Contents for Amazone Centaya 3000 Super 1600
