Structure and function
56
Centaya Super BAH0092-6 10.20
5.3.1
AMAZONE AmaTron 4 control terminal
As an option, the combination can be delivered
e.g. with the AMAZONE AmaTron 4 control
terminal.
The AmaTron 4 control terminal (Fig. 38) can
operate all implements that are equipped with
the ISOBUS system.
Instructions for operating
the AMAZONE job computer
can be found in the "ISOBUS Software"
operating manual
the ISOBUS-compatible control terminal
can be found in the "AmaTron 4" operating
manual.
Fig. 38
5.3.2
AMAZONE TwinTerminal
The communication with the control terminal in
the tractor cab takes place through the
TwinTerminal. The TwinTerminal can be used on
implements with ISOBUS system.
The TwinTerminal (Fig. 39) is located in the
control centre and saves the tractor driver the
walk over to the tractor cab, e.g. when starting
the calibration procedure or entering the
collected calibrated quantity.
During residual emptying of the seed hopper, the
motor that drives the metering roller in the
metering unit is switched on and off using the
TwinTerminal. Like with the calibration test, the
metered material is collected.
For a more detailed description, refer to the
"ISOBUS software" operating manual.
Fig. 39
Summary of Contents for Amazone Centaya 3000 Super 1600
