Note:
The device should face up to the sky.
Metal thermal barrier or heating layer of the windshield affects the signal. Please change
installation places to receive better signal.
4. Operation of device
Power on/ Power off
Power on:
once you insert a valid SIM card and connect all the wires, turn on the device.
Power LED will flash first. During signal searching process, GSM LED and GPS(blue) LED
will flash. Once Blue GPS LED keeps steadily ON, it means the device has been located
and it starts to work.
Power off:
Just toggle off the power switch.
Notice:
When device is connected with external power, please turn on the battery switch.
The battery will then connect with the device circuits and its built-in battery will be
charged. If battery is OFF, battery can't be charged. The device will be power off if no
external power supply.
5. Main Functions
1. SOS
In
emergent case, press SOS for 3 seconds to activate SOS alarm. Then the device will
send SOSSMS to preset SOS numbers and then dial the numbers in a loop for 3 times until
the call is picked up. Alarm message will also send to platform. (See command list 7-9)
2. Power cut-off Alarm
When the electricity supply of device is cut off, it will activate cut-off alarm.
3. Low Battery Alarm
When battery is low, the device will activate low battery alarm. Device will send alert
through
SMS and to the platform.
4. Vibration Alarm (Default OFF)
When vehicle vibrates for several times, the vibration alarm will be triggered. If ignition
keeps OFF for 3 minutes (ACC OFF), the device will send vibration alarm message
immediately.{See command list 7-'3)
5. Voice Monitoring
Summary of Contents for Amber Power C210
Page 1: ......
