User manual
© Amberg Technologies, 2018
Page 13 of 68
Chapter 3 Point cloud measurements
Point cloud measurements of a heading are stored as part of the project and managed with the
Point clouds
editor. To open the editor, go to the
Measurements
node in the project tree and
double-click on
Points clouds
of a construction stage.
3.1 Point clouds editor
3.1.1 Overview editor
The
Overview editor
lists all measured point clouds of a construction stage.
Figure 1. Point clouds editor
The graphical area displays a overview of the selected point clouds from the table in top view.
The measured point clouds table holds all measured point clouds imported to a construction
stage. In the table, each point cloud is listed with its attributes.
Heading stationing / 3D Tun-
nelmeter
Computed average Heading stationing / 3D Tunnelmeter
value of all points of the measured point cloud. Select the
stationing mode in the settings of this editor.
Point cloud name
Point cloud name of the point cloud (optional).
Operator
Operator that carried out the measurements (optional).
Date and time
Date and time the measurements were carried out (option-
al).
Summary of Contents for Tunnel 2.0 - Tunnelscan
