User manual
© Amberg Technologies, 2018
Page 27 of 68
Chapter 4 Analysis and reporting
This chapter describes the manifold analysis options of Amberg Tunnelscan. The work flow
and many settings are similar in most analysis types.
You may create a copy of any existing analysis by clicking on the analysis node and
select
Create copy
from the context-menu. A new analysis is added to the same head-
ing, preserving the settings of the original analysis.
4.1 Analysis type Line scan
The analysis type
Line scan
compares measured point clouds measured in one construction
stages against the design data of the selected reference. Normally the analyses is used for long
measured tunnel sections under construction (E.g. Shotcrete Layer 2) or of existing tunnels or
shafts for as build measurements.
4.1.1 Add analysis wizard
To create a point cloud analysis, right-click on the
Analysis
node of the heading in the
Project
tree
and select
Add point cloud analysis...
from the context menu. The
New analysis wizard
will guide you through the steps described below.
Figure 11. New analysis wizard
1. On the first wizard page, set
Line scan
as analysis type. Enter a name for the analysis,
optionally add a comment and click
Next
.
2. On the second wizard page, select a
Reference construction stage
that will be used for all
axis-related calculations displayed in the diagrams. Optionally select
Additional construc-
tion stages for display
, whose design data will be used for graphical purposes only. Set
Deviation unit and format
and
Stationing mode
that you want to use in this analysis. If
necessary, you can change all these settings in the settings dialog later. Click
Next
.
3. On the third wizard page, you can select one construction stages as data source. The anal-
ysis will take into account all measured point clouds from the selected construction stages.
4. On the next wizard page, select a
Resolution
and
Filter
that will be used for the point cloud
down sampling of the analyses and to remove points automatically from the analyses result
of the point cloud.
Summary of Contents for Tunnel 2.0 - Tunnelscan
