User manual
Analysis and reporting
© Amberg Technologies, 2018
Page 35 of 68
■
Fixed at
: A user defined width. Set a fixed grid width manually.
Block definition
If this option is activated, the
Block definition
of the reference con-
struction stage is displayed.
4.1.3.9 Visualisation - Measurements
Modify the brightness and the contrast appearance of the measured point cloud.
Figure 22. Settings dialog, Visualisation - Measurements
Brightness
Adjust the brightness of the displayed point cloud in the analyses.
Contrast
Adjust the contrast of the displayed point cloud in the analyses.
4.1.3.10 Visualisation - Color maps
The calculated deviation values of the measured point cloud to the reference tunnel model can
be displayed in various colours. Points in different distance ranges to the theoretical tunnel
model can be displayed with different colours. Use the following settings to modify the displayed
results.
Figure 23. Settings dialog, Visualisation - Color maps
Deviation
Select the color between the different deviation values that should be used. Use
the
Add
and
Delete
button to modify the values of the color scale.
Summary of Contents for Tunnel 2.0 - Tunnelscan
