10
11.
When the popcorn maker has finished – you will no longer hear the corn
popping – immediately turn the 'POP' switch to the 'OFF' position and pull down
the handle bar of the kettle to release any remaining popcorn in the kettle.
NOTE:
This will also stop the remaining popcorn from cooking any further and
avoid possible burning.
12.
Keep 'POP' switch off if the unit is not in use.
NOTE:
DO NOT
run your machine continuously as this could cause your
popcorn popper to overheat. Always allow the kettle to cool-down for
approximately 5-10 minutes between continuous batches. This will avoid
over-heating the kettle.
NOTE:
Remove the plug from the power supply when the unit is not being used.
DO NOT
overfill the kettle. Doing so may cause overheating and burning of
kernels.
DO NOT
use microwave popcorn in your Kettle Popcorn Maker.
Instructions
