User instructions
9
User instructions
Before first use, clean the inside of the unit by wiping clean all the parts, including
the kettle, with a non-abrasive soft damp cloth or sponge and warm water. Rinse
and dry thoroughly with a non-abrasive towel. DO NOT IMMERSE THE KETTLE
POPCORN MAKER IN WATER OR ANY OTHER LIQUID.
Be sure the kettle is properly placed in the brackets before starting.
How to Use
1.
Find a flat surface near an electrical outlet before starting. Make sure the cord
is away from any water source. It is acceptable to use an extension cord if
needed (see electrical rating in safety instructions).
2.
Hold the kettle still with left hand while putting on the crank handle with your
right hand (turning toward you) until it is tight.
3.
Gather your popcorn making supplies such as popcorn, seasonings, bowls,
bags, cooking oil, and the kernel and oil measuring spoon that is included with
the unit.
4.
Make sure the kettle is properly secured in the support brackets.
5.
Next, make sure the kettle motor is plugged in.
6.
With the power switch on OFF, plug the external power cord into an outlet.
7.
Turn the popcorn maker on by pressing the switch at the top of the machine
to ON and allow the kettle to heat up for about 3-5 minutes, then turn to OFF.
8.
A small amount of smoke and/or odor may occur during heating due to the
release of manufacturing oils, this is normal and will go away after first few
uses.
