background image

MODEL: SM-1004SP   PRODUCT CODE: 61618   07/2018

MODEL: SM-1004SP   PRODUCT CODE: 61618   07/2018

15

info@tempo.org

AFTER SALES SUPPORT

1300 886 649

AUS

14

info@tempo.org

AFTER SALES SUPPORT

1300 886 649

AUS

Other Useful Information

Cleaning and Care

WARNING!

•  Ensure the Pie Maker is disconnected from the mains supply and has cooled 

down fully before cleaning or storing. 

•  Never immerse the appliance, power cord or plug in water or any other liquid. 

Never wash it in a dishwasher. Never run water directly onto the pie moulds.

•  Do not use harsh abrasive cleaners or cleaning materials (such as steel 

wool, scouring pads or oven cleaners) on any part of the appliance. They will 
damage the non-stick coating of the pie moulds and affect the finish of the 
appliance housing.

•  Always unplug the Pie Maker from the mains supply before cleaning. 

•  In order to prevent food residue build-up, clean your Pie Maker after each 

use. Wipe the inside 

pie mould surfaces clean using a soapy sponge or 

cloth, making sure that no moisture or oil enters the appliance. Remove soapy 
residue with a damp cloth and dry thoroughly.

•  To remove 

stubborn stains or baked on food residues, use a nylon brush 

or other utensil safe for non-stick surfaces. Do not use steel wool or scouring 
pads. Do not use abrasive cleansers.

•  Wipe the 

exterior with a clean, damp cloth.

•  Wash the 

pastry cutter in warm, soapy water. Do not wash it in a dishwasher.

Storage

•  Ensure the Pie Maker has completely cooled and is clean (see above) and 

completely dry. Close the lid and lock the handles together. The cord can be 
wrapped around the stand at the back of the underside of the Pie Maker. 

•  For compact storage in a space-saving vertical position, store the Pie Maker up-

right on its back, using the stand for support. Alternatively, place the appliance 
in its original carton and store in a clean, dry place, out of children's reach.

Service and Repair

If the Pie Maker is damaged, 

do not attempt to repair it yourself.

 There are no 

spare parts available for purchase. All repairs and servicing must be performed 
by an authorised technician. Contact our after sales support centre to arrange for 
examination or repair of the product.

Technical Specifications

Model

SM-1004SP

Power

1400W, 220–240V ~, 50Hz

Pie moulds

Non-stick coated for easy cleaning 
228mm diameter, 28mm deep

Indicator lights

Red: Power
Green: Ready

Cord storage

Around back stand underneath

Dimensions 

approx. 345mm (L) x 122mm (H) x 255mm (W)

Weight

approx. 2.3kg

Accessories supplied

Reversible pastry cutter 

Compliance

This appliance has been fully tested and meets all requirements as set out by 
standards AS/NZS 60335.1 and AS/NZS 60335.2.9 for electrical safety.

Responsible Disposal

At the end of its working life, do not throw this appliance out with your household 
rubbish. Electrical and electronic products contain substances that can have 
a detrimental effect on the environment and human health if disposed of 
inappropriately. Observe any local regulations regarding the disposal of electrical 
consumer goods and dispose of it appropriately for recycling. Contact your local 
authorities for advice on recycling facilities in your area.

Other Useful Information (Cont.)

NOTE: 

Due to continued product improvement, images and illustrations in this manual may vary 

slightly from the product purchased. All images in this manual are for reference purposes 

only. Parts are not necessarily pictured to scale.

Summary of Contents for SM-1004SP














Reviews: