DNS (Domain Name Server): Your ISP will provide you with at least on DNS
IP address. Enter IP address here if you choose ‘Specify an IP address’ option.
♦
♦
PPPoE: You will need to call your ISP to find whether PPPoE should be
enabled or not. If yes, you will need to also fill both the ‘User Name’ and
‘Password’ fields that are provided by your ISP. The PPPoE connection will
be disconnected if it is been idling for a period beyond the
Max Idle Time
setting. If you check the
Keep Alive
option, the AmbiCom Gateway will
always try to keep the line alive.
For most users, the default values for the device should be satisfactory. The
device can be used in most network scenarios without changing any of the
settings. Some users will be required to enter additional information in order to
connect to the Internet through an ISP or broadband (Cable/DSL modem
connection) provider.
Wireless Access Router User Manual
11