•
DHCP Setting
The Gateway can be setup to be used as a DHCP (Dynamic Host Configuration
Protocol) server on your network. A DHCP server assigns an available IP address
to each computer on your network automatically. You must configure all the PCs
on your LAN to connect to a DHCP server. Consult your operating system’s
documentation to learn how to do this.
If you do not want to use the Gateway’s DHCP server function, you have to
carefully configure the IP address, IP mask, and DNS setting on every computer
on your network. Be careful not to assign the same IP Address to different
computers.
Beginning IP Address: Enter a numerical value for the DHCP server to begin
assigning addresses.
♦
♦
♦
Number of DHCP users: Enter the maximum number of computers that you
want the DHCP server to assign IP addresses to.
Click ‘Apply’ to save the data
Wireless Access Router User Manual
14