•
Filters
By using the Filters screen, you can configure the Gateway to block specific
internal users from accessing the Internet. You can setup different filters for
different users based on their IP addresses or their network Port number.
♦
♦
♦
♦
♦
Enter the IP address that you want to filter into the ‘Filtered Private IP’ fields.
User with an IP address you filtered will not be able to access the Internet.
You can filter users by entering their network port number. Select the
protocols and enter the port numbers into the ‘Filtered Private Port’ fields.
User with a port number you filtered will not be able to access the Internet.
You can also filter users by entering their physical address. Enter MAC
addresses that you want to filter into the ‘Private MAC Filter’ fields. User
with the MAC address you filtered will not be able to access the Internet.
Click ‘Apply’ button to save any change
Wireless Access Router User Manual
15