Please wait for about 30 seconds, then click
‘OK!’
button. You’ll be back to router management interface again, and the router
is ready with new settings.
2-7-5 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients and this wireless router.
You don’t have to select encryption mode and input a long encryption passphrase every time when you need to setup a
wireless client, you only have to press a button on wireless client and this wireless router, and the WPS will do the rest for you.
This wireless router supports two types of WPS: Push-Button Configuration (PBC), and PIN code. If you want to use PBC, you
have to push a specific button on the wireless client to start WPS mode, and switch this wireless router to WPS mode too. You
can push Reset/WPS button of this wireless router, or click ‘Start PBC’ button in the web configuration interface to do this; if
you want to use PIN code, you have to know the PIN code of wireless client and switch it to WPS mode, then provide the PIN
code of the wireless client you wish to connect to this wireless router. The detailed instructions are listed follow:
Please click ‘Wireless’ menu on the left of web management interface, then click ‘WPS’, and the following message will be
displayed on your web browser:
1
2
3
4
5
47
