background image

1

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety 

precautions should always be followed, including the 

following:

1. To ensure Familiarity with the controls, safety features, 

    and operation of your heater -Read all instructions before 

    using.

2. Do not insert foreign objects through the intake or 

    discharge grilles.

3. This appliance can be used by children aged from 8 

    years and above and persons with reduced physical, 

    sensory or mental capabilities or lack of experience and 

    knowledge if they have been given supervision or 

    instruction concerning use of the appliance in a safe way 

    and understand the hazards involved. Children shall not 

    play with the appliance. Cleaning and user maintenance 

    shall not be made by children without supervision.

4. Disconnect the cord from the outlet before cleaning. A 

    heater should never be used under conditions where it 

    may be immersed, or come in contact with water. 

    Similarly do not plug in your heater if its surfaces are 

    damp. 

5. Do not use the appliance on the same socket or electric 

    circuit with other electrical appliances so as to prevent 

    the circuit from being overloaded, which will cause fire. 

    Please do not prolong the power cords by yourself or use 

    movable socket.

6. Unplug heater by grasping plug and pulling it from the 

    outlet. NEVER YANK ON CORD.

7. If the supply cord is damaged, it must be replaced by its 

    service agent or a similar qualify person in order to avoid 

    hazard.

Summary of Contents for NDK15-12K










Reviews: