background image

2

8. Do not use in locations when the heater will be left 

    unattended for long periods of time. (for example -

    several weeks in an unoccupied summer cottage)

9. Do not use attachments not recommended and sold by 

    MIDEA distributor.

10. Loose connections between the heater plug and the 

    electrical outlet may cause the plug to overheat.

11. Ensure no other appliances are plugged into the same 

    circuit as your heater. A circuit overload could occur 

    resulting in dimmed lights, blown fuses, tripped circuit 

    breakers, or fire hazard.

12. The heater is intended for household indoor use only.

13. The heater must not be located immediately below a 

    socket-outlet.

14.       Warning: In order to avoid overheating, do not cover 

    the heater.

15. Do not use this heater in the immediate surroundings of 

    a bath, a shower or a swimming pool.

16.

17. Children of less than 3 years should be kept away unless 

    continuously supervised. Children aged from 3 years and 

    less than 8 years shall only switch on/off the appliance 

    provided that it has been placed or installed in its intended 

    normal operating position and they have been given 

    supervision or instruction concerning use of the appliance 

 

Correct Disposal of this product 
This marking indicates that this product should not be disposed with 
other  household  wastes  throughout  the  EU.  To  prevent  possible 
harm to the environment or human health from uncontrolled waste 
disposal, recycle it responsibly to promote the sustainable reuse of 
material resources. To return your used device, please use the return 
and collection systems or contact the retailer where the product was 
purchased.  They  can  take  this  product  for  environmental  safe 
recycling. 

Summary of Contents for NDK15-12K










Reviews: