VSLOT
www.ambient.de/en
5
Panels Cable
Right side Battery release lever
4.
Getting Started
Before sliding-in the receiver into the V-SLOT, check the position of the screws and the orientation of
the UNISLOT connector, if your receiver is directed right. After sliding-in the receiver, fix it with the
screws of the receiver.
Now, attach the V-Slot to the camera and the battery to the V-Slot with the V-Mount and make sure that
both are locked in place.
The camera, the receiver as well as equipment connected to the power outlet of the slot will now be
powered by the connected battery.
