50D0089 Rev 2
Page 5 of 10
Ambient Technologies
A Division Of MHS
Setting Privacy (DIP) Switch on Receiver and Transmitter:
The receiver and transmitter privacy (DIP) switches are preset at the factory. In the event of activation or
interference from other nearby transmissions, reset the code using the following procedure:
1.
Slide the code switches on the transmitter or receiver to your choice of ON or OFF position. Switches #1,
#3 and #4 are preset to “ON”, and #2 is preset to “OFF” for both the transmitter and receiver.
2.
The switches on the transmitter and receiver must match in order for the system to work.
3.
The system is now ready to operate.
OPERATIONS:
WARNING
Do not use two (2) or more remote control systems in the same area with the same dip switch
settings, as they will communicate with each other. This may cause the appliances to
malfunction.
Receiver
Dip Switch (Default)
Transmitter
