Ambient Technologies WWTD Installation And Operating Instructions Manual Download | Manualshive

Page: 10 / 10

background image

50D0077 Rev 1

Page 10 of 10

Ambient Technologies

A Division Of MHS

This warranty and our liability does not apply to batteries, nor does it include damage to merchandise or the remote
control resulting from accident, alteration, neglect, misuse, improper installation or any other failure to follow
Ambient Technologies installation and operating instructions.
Ambient Technologies agrees to repair or replace at its option any Ambient Technologies remote control under
warranty provided it is returned postage prepaid to our warranty facility in a padded carton within the warranty
period, with proof of the original date of purchase and a brief description of the malfunction. This limited warranty
does not include the cost of removal or re-installation.

Ambient Technologies

149 Cleveland Drive

Paris KY 40361

FOR TECHNICAL SUPPORT

CALL 800-398-6195

«
...
8
9
10

Summary of Contents for WWTD











Reviews:

No comments

Related manuals for WWTD

Brand: Aaeon Pages: 76

Brand: Campbell Pages: 8

Brand: Gascat Pages: 32

Brand: M-Audio Pages: 26

Brand: M Climate Pages: 12

Brand: Warner Electric Pages: 4

Brand: DeLaval Pages: 102

Brand: Frico Pages: 8

Brand: Manfrotto Pages: 2

Brand: Belkin Pages: 60

Aqua Wireless 8347

Brand: claber Pages: 172

Brand: BC BATTERY Pages: 2

Brand: FONESTAR Pages: 2

Brand: AMCI Pages: 49

Brand: hager Pages: 4

Brand: B&R Pages: 16

Giatsu GIA-J105

Brand: GIA Pages: 9

Brand: Crystal Vision Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands