Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
Page 10
5.6
Projector and Backlight
5.6.1
Using the Projector and Backlight
Note:
The projector and backlight are temporary when operating on batteries only, to save
battery life.
1. When the clock is powered by the battery:
1.1
Press
SNOOZE/LIGHT
key to turn on the projector and backlight for 5 seconds.
1.2
Or press and hold
SNOOZE/LIGHT
key for 4 seconds to turn on the projector for 30
minutes. During the projection, press the
SNOOZE/LIGHT
key again to turn off the
projection.
2.
When the clock is powered by the AC adapter:
2.1
Slide the
PROJECTION ON/OFF
switch to the
ON
position, and the projection will be on
all the time, or slide it to the
OFF
position to return to normal mode.
2.2
Slide the
LIGHT ON/OFF
switch to
ON
position, and the backlight will be on all the time,
or slide it to
OFF
position to return to normal mode.
5.6.2
Projector Backlight Rotation
1.
Press
SNOOZE/LIGHT
key to turn on the projector and backlight.
2.
Press the
REVERSE
key
to reverse the projected data 180 degrees.
Figure 10
5.6.3
Adjusting Backlight Focus
Adjust the focus of the projected data by rotating the focus knob on the projector.
5.7
Low Battery Indictor
When the battery is full, no battery icon will be displayed. When the battery is low, the low battery
indicator will be displayed. Replace with 3 new AA size batteries. Pay attention to the polarity. After
the batteries are replaced, unplug an plug in the AC adapter to clear the low battery indicator.
Figure 11
