Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 8
5.1 Min/Max Mode
The Min/Max mode displays the minimum and maximum temperature and humidity (since reset of the
unit) for the indoor, remote channel 1 through 8 sensors.
Prior to entering the MIN/MAX mode, press the
C
button to select the temperature and
humidity values you wish to view.
1.
Display Maximum
. Press the
MIN/MAX
button once to display the maximum. The
MAX
icon will be displayed.
2.
Clear Maximum.
To reset the maximum values to the current values,
press and hold
the
CLEAR
button for 3 seconds.
3.
Display Minimum
. Press the
MIN/MAX
button again to display the minimum. The
MIN
icon will be displayed.
4.
Clear Minimum.
To reset the minimum values to the current values,
press and hold
the
CLEAR
button for 3 seconds.
To return to normal mode, press the
MIN/MAX
button again.
5.2 Indoor/Outdoor Channel Selection
Press the
C
button to switch the display between the indoor temperature and humidity
,
remote sensors 1 through 8, and scroll mode
. In scroll mode, all of the indoor and detected
outdoor sensors will be displayed in five second intervals.
5.3 Temperature Units of Measure
The default temperature units of measure are degrees Fahrenheit. To toggle between degrees Celsius
and degrees Fahrenheit, press and hold the
MIN/MAX
button for 3 seconds.
5.4 Sensor Search Mode
If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire
the signal:
1.
If a specific channel is lost, press the
C
button to display this channel, then Press
and hold the
C
button for 3 seconds, and the remote search icon
will be
constantly displayed for up to 10 minutes. Once the signal is reacquired, the remote search
icon
will turn off, and the current values will be displayed.
2.
If new sensors are added, subtracted, or multiple sensor channels are lost, press the
C
button until the indoor channel
is displayed. Press and hold the
C
button for 3 seconds, and the remote search icon
will be constantly
displayed for up to 10 minutes. Once the signal is reacquired, the remote search icon
will turn off, and the current values will be displayed.
5.5 Best Practices for Wireless Communication
Note:
To insure proper communication, mount the remote sensor on a vertical surface, such as a
wall.
Do not lie the sensor flat.
Wireless communication is susceptible to interference, distance, walls and metal barriers. We
recommend the following best practices for trouble free wireless communication.
1.
Electro-Magnetic Interference (EMI)
. Keep the console several feet away from computer
monitors and TVs.
2.
Radio Frequency Interference (RFI).
If you have other 433 MHz devices and
